On Grid SOLAR Inverters(3Kw~15Kw) PDF Print E-mail
Products - New Solar Technology
Tuesday, 31 January 2012 08:41
On Grid SOLAR Inverters(3Kw~15Kw)

On Grid SOLAR Inverters(3Kw~15Kw)

Model: EA3K5LPV
Product Approvals: TUV, CE
Brief Description: Out door grid-connected PV inverter, solar inverter, three phase, single phase, 5 years warranty

 

Key Specification

  • Introduction

    Photovoltaic (PV) grid inverter is the core equipment in the PV grid power station, whose reliability; efficiency and security affect the whole PV system, and has a direct bearing on power capacity of the power station and operation.
    Solar PV grid power system is composed of PV Modules, Grid inverter, Metering device and Distribution system. PV Module transforms Solar energy into DC power, and Grid inverter transforms DC power into sine wave current with same frequency and same phase of electricity grid and puts it into electricity grid.
    Solar PV grid power system is the trend of solar PV power development, which stands for the most attractive energy utilization technology in 21 century. It puts energy directly into electricity grid, without storing energy by battery, make full use of electric power from renewable energy, decreasing the energy loss and reducing the system cost. Solar PV grid power system uses both Mains power and renewable energy as power supply for AC load, which reduces the load power shortage rate of the whole systems, meanwhile, the renewable energy grid system is used for peak modulation against public electricity grid.
    Features & Benefits
    Home appliance Small-sized PV station, Could be used in series
    l Single MPPT (with 3 groups, with flexible configuration and installation)
    l Outdoor waterproof design (IP65)
    l Wide range of operating temperature: -25℃-+60℃,and in 50℃, it can keep the max power output
    l Multi-lingual LCD display which could be set at user’s willing
    l Islanding protection
    l Inline waterproof block
    l RS485 and USB communication port
    l TUV CE certificate, comply with Germany VDE 0126-1-1 standard.
    l Italy DK5940 certificate, Australia AS4777 certificate, CQC (including SUN certificate)
    Technicial Specifications

     

    Model EA3KLPV EA5KLPV
    Input (DC)
    Max DC power 3850Wp 5500Wp
    Max DC voltage 520V 520V
    Start Voltage 150V 150V
    Nominal DC voltage 360V 360V
    Max DC current 20A 20A
    Full-load MPP voltage range 200~420V 260~420V
    Number of MPP-Trackers 1 2
    MPPT efficiency (static) >99% >99%
    Max input current 19A 20A
    Insulation voltage Basic insulation 3000Vdc / 1 min Basic insulation 3000Vdc / 1 min
    output (AC)
    Nominal AC power 3500W 5000W
    Nominal AC voltage 230Vac 230Vac
    AC voltage range 180Vac~260Vac 180Vac~260Vac
    Nominal AC current 15A 22A
    Nominal frequency 50Hz/60Hz 50Hz/60Hz
    Frequency tolerance range 47~51.5Hz / 57~61.5Hz 47~51.5Hz / 57~61.5Hz
    Distortion (THD%) <3% (at norminal power)
    DC current component <75mA <110mA
    Power factor (cos phi) >0.99 >0.99
    Insulation voltage Basic insulation 3000Vdc / 1 min
    Number of grid phases 1 1
    Efficiency
    Max efficency 97.3% 97.3%
    Euro efficiency 96.2% 96.5%
    General requirements
    Standby consumption 12W 12W
    Night consumption 0W 0W
    Topology transformerless transformerless
    Mean Time Between Failure (MTBF) 40,000h 40,000h
    Standard warranty 20 years 20 years
    Protection
    Reverse protection (Input) Yes Yes
    Short-circuit protection (Input/Output) Yes Yes
    Overload protection (Output) Yes Yes
    Undervoltage / Overvoltage protection point (Grid) 160Vac/276Vac 160Vac/276Vac
    Undervoltage / Overvoltage protection point (DC) 120V/550V 120V/550V
    Underfrequency / Overfrequency protection point (Grid) 52Hz/ 46.5Hz ; 62Hz/ 56.5Hz
    Leakage current protection DIN VDE 0126-1-1
    Fault current protection
    Anti-islanding protection
    Standards & guidelines
    Certificates TUV ,CE , DIN VDE0126-1-1,comply with the DK5940
    EMC EN61000-6-1,EN61000-1-2,EN61000-6-3 , EN61000-1-4 / Class B
    Safety and regulatory IEC 62109-1
    Other
    Dimensions(L×H×W) 390 mm ×480 mm ×200mm
    Weight 25kg 30kg
    Acoustic Noise level 50dB(A) 50dB(A)
    Operation temperature range -20℃~+60℃ (>45℃ derating)
    Relative humidity 0~90 % 0~90 %
    Protection type compliant with EN 60529 IP65 IP65
Payment Terms L/C,  T/T
Minimum Order 500PCS
Lead Time Delivery Time 15 days
Sample Available Yes
FOB Port Shenzhen
Loading Info FOB
Packing Info COLOR BOX
Target Market(s) Africa,  Eastern Europe,  Japan & Korea,  Mainland China,  North America,  Northern Europe,  Oceania,  Western Europe
Last Updated on Tuesday, 31 January 2012 08:45